You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 

203 lines
5.9 KiB

vs.1.1
dcl_position v0
dcl_color v5
dcl_texcoord0 v7
// Store our input position in world space in r6
m4x3 r6, v0, c25; // v0 * l2w
// Fill out our w (m4x3 doesn't touch w).
mov r6.w, c16.z;
//
// Input diffuse v5 color is:
// v5.r = overall transparency
// v5.g = reflection strength (transparency)
// v5.b = overall wave scaling
//
// v5.a is:
// v5.w = 1/(2.f * edge length)
// So per wave filtering is:
// min(max( (waveLen * v5.wwww) - 1), 0), 1.f);
// So a wave effect starts dying out when the wave is 4 times the sampling frequency,
// and is completely filtered at 2 times sampling frequency.
// We'd like to make this autocalculated based on the depth of the water.
// The frequency filtering (v5.w) still needs to be calculated offline, because
// it's dependent on edge length, but the first 3 filterings can be calculated
// based on this vertex.
// Basically, we want the transparency, reflection strength, and wave scaling
// to go to zero as the water depth goes to zero. Linear falloffs are as good
// a place to start as any.
//
// depth = waterlevel - r6.z => depth in feet (may be negative)
// depthNorm = depth / depthFalloff => zero at watertable, one at depthFalloff beneath
// atten = minAtten + depthNorm * (maxAtten - minAtten);
// These are all vector ops.
// This provides separate ramp ups for each of the channels (they reach full unfiltered
// values at different depths), but doesn't provide separate controls for where they
// go to zero (they all go to zero at zero depth). For that we need an offset. An offset
// in feet (depth) is probably the most intuitive. So that changes the first calculation
// of depth to:
// depth = waterlevel - r6.z + offset
// = (waterlevel + offset) - r6.z
// And since we only need offsets for 3 channels, we can make the waterlevel constant
// waterlevel[chan] = watertableheight + offset[chan],
// with waterlevel.w = watertableheight.
//
// So:
// c30 = waterlevel + offset
// c31 = (maxAtten - minAtten) / depthFalloff
// c32 = minAtten.
// And in particular:
// c30.w = waterlevel
// c31.w = 1.f;
// c32.w = 0;
// So r4.w is the depth of this vertex in feet.
// Dot our position with our direction vectors.
mul r0, c8, r6.xxxx;
mad r0, c9, r6.yyyy, r0;
//
// dist = mad( dist, kFreq.xyzw, kPhase.xyzw);
mul r0, r0, c5;
add r0, r0, c6;
//
// // Now we need dist mod'd into range [-Pi..Pi]
// dist *= rcp(kTwoPi);
rcp r4, c15.wwww;
add r0, r0, c15.zzzz;
mul r0, r0, r4;
// dist = frac(dist);
expp r1.y, r0.xxxx
mov r1.x, r1.yyyy
expp r1.y, r0.zzzz
mov r1.z, r1.yyyy
expp r1.y, r0.wwww
mov r1.w, r1.yyyy
expp r1.y, r0.yyyy
// dist *= kTwoPi;
mul r0, r1, c15.wwww;
// dist += -kPi;
sub r0, r0, c15.zzzz;
//
// sincos(dist, sinDist, cosDist);
// sin = r0 + r0^3 * vSin.y + r0^5 * vSin.z
// cos = 1 + r0^2 * vCos.y + r0^4 * vCos.z
mul r1, r0, r0; // r0^2
mul r2, r1, r0; // r0^3 - probably stall
mul r3, r1, r1; // r0^4
mul r4, r1, r2; // r0^5
mul r5, r2, r3; // r0^7
mul r1, r1, c14.yyyy; // r1 = r0^2 * vCos.y
mad r2, r2, c13.yyyy, r0; // r2 = r0 + r0^3 * vSin.y
add r1, r1, c14.xxxx; // r1 = 1 + r0^2 * vCos.y
mad r2, r4, c13.zzzz, r2; // r2 = r0 + r0^3 * vSin.y + r0^5 * vSin.z
mad r1, r3, c14.zzzz, r1; // r1 = 1 + r0^2 * vCos.y + r0^4 * vCos.z
// r0^7 & r0^6 terms
mul r4, r4, r0; // r0^6
mad r2, r5, c13.wwww, r2;
mad r1, r4, c14.wwww, r1;
// Calc our depth based filtering here into r4 (because we don't use it again
// after here, and we need our filtering shortly).
sub r4, c30, r6.zzzz;
mul r4, r4, c31;
add r4, r4, c32;
// Clamp .xyz to range [0..1]
min r4.xyz, r4, c16.zzzz;
max r4.xyz, r4, c16.xxxx;
// Calc our filter (see above).
mul r11, v5.wwww, c29;
max r11, r11, c16.xxxx;
min r11, r11, c16.zzzz;
//mov r2, r1;
// r2 == sinDist
// r1 == cosDist
// sinDist *= filter;
mul r2, r2, r11;
// sinDist *= kAmplitude.xyzw
mul r2, r2, c7;
// height = dp4(sinDist, kOne);
// accumPos.z += height; (but accumPos.z is currently 0).
dp4 r8.x, r2, c16.zzzz;
// Smooth the approach to the shore.
/*
sub r10.x, r6.z, c30.w; // r10.x = height
mul r10.x, r10.x, r10.x; // r10.x = h^2
mul r10.x, r10.x, c10.x; // r10.x = -h^2 * k1 / k2^2
add r10.x, r10.x, c10.y; // r10.x = k1 + -h^2 * k1 / k2^2
max r10.x, r10.x, c16.xxxx; // Clamp to >= zero
add r8.x, r8.x, r10.x; // r8.x += del
*/
mul r8.y, r8.x, r4.z;
add r8.z, r8.y, c30.w;
max r6.z, r6.z, r8.z;
// r8.x == wave height relative to 0
// r8.y == dampened wave relative to 0
// r8.z == dampened wave height in world space
// r6.z == wave height clamped to never go beneath ground level
//
// cosDist *= filter;
mul r1, r1, r11;
// Pos = (in.x + S, in.y + R, r6.z)
// S = sum(k Dir.x A cos())
// R = sum(k Dir.y A cos())
// c17 = k Dir.x A
// c18 = k Dir.y A
// S = sum(cosDist * c17);
dp4 r7.x, r1, c17;
dp4 r7.y, r1, c18;
add r6.xy, r6.xy, r7.xy;
// Initialize r0.w
mov r0.w, c16.zzzz;
//##dp3 r0.x, r3, r3;
//##rsq r0.x, r0.x;
//##mul r3, r3, r0.xxxw;
//
// // Transform position to screen
//
//
//m4x3 r6, v0, c25; // HACKAGE
//mov r6.w, c16.z; // HACKAGE
//m4x4 oPos, r6, c0; // ADDFOG
m4x4 r9, r6, c0;
add r10.x, r9.w, c11.x;
mul oFog, r10.x, c11.y;
mov oPos, r9;
// Color
mul oD0, c4, v5.xxxx;
// UVW0
// This layer just stays put. The motion's in the texture
// U = transformed U
// V = transformed V
dp4 r0.x, v7, c19;
dp4 r0.y, v7, c20;
//mul r0.y, r0.y, -c16.z;
//add r0.y, r0.y, c16.z;
//add r0.y, r0.y, c16.z;
//add r0.y, r0.y, c16.y;
mov oT0, r0.xyww;
mov oT1, r0.xyww;
mov oT2, r0.xyww;