CWE-ou-minkata/Sources/Plasma/PubUtilLib/plSurface/ShaderSrc/vs_WaveRip7.inl

vs.1.1

dcl_position v0
dcl_color v5
dcl_texcoord0 v7

// Store our input position in world space in r6
m4x3        r6, v0, c25; // v0 * l2w
// Fill out our w (m4x3 doesn't touch w).
mov         r6.w, c16.z;

//

// Input diffuse v5 color is:
// v5.r = overall transparency
// v5.g = reflection strength (transparency)
// v5.b = overall wave scaling
//
// v5.a is:
// v5.w = 1/(2.f * edge length)
// So per wave filtering is:
// min(max( (waveLen * v5.wwww) - 1), 0), 1.f);
// So a wave effect starts dying out when the wave is 4 times the sampling frequency,
// and is completely filtered at 2 times sampling frequency.

// We'd like to make this autocalculated based on the depth of the water.
// The frequency filtering (v5.w) still needs to be calculated offline, because
// it's dependent on edge length, but the first 3 filterings can be calculated
// based on this vertex.
// Basically, we want the transparency, reflection strength, and wave scaling
// to go to zero as the water depth goes to zero. Linear falloffs are as good
// a place to start as any.
//
// depth = waterlevel - r6.z        => depth in feet (may be negative)
// depthNorm = depth / depthFalloff => zero at watertable, one at depthFalloff beneath
// atten = minAtten + depthNorm * (maxAtten - minAtten);
// These are all vector ops.
// This provides separate ramp ups for each of the channels (they reach full unfiltered
// values at different depths), but doesn't provide separate controls for where they
// go to zero (they all go to zero at zero depth). For that we need an offset. An offset
// in feet (depth) is probably the most intuitive. So that changes the first calculation
// of depth to:
// depth = waterlevel - r6.z + offset
//      = (waterlevel + offset) - r6.z
// And since we only need offsets for 3 channels, we can make the waterlevel constant
// waterlevel[chan] = watertableheight + offset[chan],
// with waterlevel.w = watertableheight.
//
// So:
//  c30 = waterlevel + offset
//  c31 = (maxAtten - minAtten) / depthFalloff
//  c32 = minAtten.
// And in particular:
//  c30.w = waterlevel
//  c31.w = 1.f;
//  c32.w = 0;
// So r4.w is the depth of this vertex in feet.

// Dot our position with our direction vectors.
mul     r0, c8, r6.xxxx;
mad     r0, c9, r6.yyyy, r0;

//
//    dist = mad( dist, kFreq.xyzw, kPhase.xyzw);
mul         r0, r0, c5;
add         r0, r0, c6;
//
//    // Now we need dist mod'd into range [-Pi..Pi]
//    dist *= rcp(kTwoPi);
rcp         r4, c15.wwww;
add         r0, r0, c15.zzzz;
mul         r0, r0, r4;
//    dist = frac(dist);
expp     r1.y, r0.xxxx
mov      r1.x, r1.yyyy
expp     r1.y, r0.zzzz
mov      r1.z, r1.yyyy
expp     r1.y, r0.wwww
mov      r1.w, r1.yyyy
expp     r1.y, r0.yyyy
//    dist *= kTwoPi;
mul         r0, r1, c15.wwww;
//    dist += -kPi;
sub         r0, r0, c15.zzzz;

//
//    sincos(dist, sinDist, cosDist);
// sin = r0 + r0^3 * vSin.y + r0^5 * vSin.z
// cos = 1 + r0^2 * vCos.y + r0^4 * vCos.z
mul         r1, r0, r0; // r0^2
mul         r2, r1, r0; // r0^3 - probably stall
mul         r3, r1, r1; // r0^4
mul         r4, r1, r2; // r0^5
mul         r5, r2, r3; // r0^7

mul         r1, r1, c14.yyyy;       // r1 = r0^2 * vCos.y
mad         r2, r2, c13.yyyy, r0;   // r2 = r0 + r0^3 * vSin.y
add         r1, r1, c14.xxxx;       // r1 = 1 + r0^2 * vCos.y
mad         r2, r4, c13.zzzz, r2;   // r2 = r0 + r0^3 * vSin.y + r0^5 * vSin.z
mad         r1, r3, c14.zzzz, r1;   // r1 = 1 + r0^2 * vCos.y + r0^4 * vCos.z

// r0^7 & r0^6 terms
mul         r4, r4, r0; // r0^6
mad         r2, r5, c13.wwww, r2;
mad         r1, r4, c14.wwww, r1;

// Calc our depth based filtering here into r4 (because we don't use it again
// after here, and we need our filtering shortly).
sub         r4, c30, r6.zzzz;
mul         r4, r4, c31;
add         r4, r4, c32;
// Clamp .xyz to range [0..1]
min         r4.xyz, r4, c16.zzzz;
max         r4.xyz, r4, c16.xxxx;
//mov r4.xyz, c16.xxx; // HACKTEST

// Calc our filter (see above).
mul         r11, v5.wwww, c29;
max         r11, r11, c16.xxxx;
min         r11, r11, c16.zzzz;

//mov    r2, r1;
// r2 == sinDist
// r1 == cosDist
//    sinDist *= filter;
mul         r2, r2, r11;
//    sinDist *= kAmplitude.xyzw
mul         r2, r2, c7;
//    height = dp4(sinDist, kOne);
//    accumPos.z += height; (but accumPos.z is currently 0).
dp4         r8.x, r2, c16.zzzz;
mul         r8.y, r8.x, r4.z;
add         r8.z, r8.y, c30.w;
max         r6.z, r6.z, r8.z;
// r8.x == wave height relative to 0
// r8.y == dampened wave relative to 0
// r8.z == dampened wave height in world space
// r6.z == wave height clamped to never go beneath ground level
//
//    cosDist *= filter;
mul         r1, r1, r11;

// Pos = (in.x + S, in.y + R, r6.z)
// S = sum(k Dir.x A cos())
// R = sum(k Dir.y A cos())
// c10 = k Dir.x A
// c11 = k Dir.y A
//    S = sum(cosDist * c10);
dp4         r7.x, r1, c10;
//    R = sum(cosDist * c11);
dp4         r7.y, r1, c11;

add         r6.xy, r6.xy, r7.xy;


// Bias our vert up a bit to compensate for precision errors.
// In particular, our filter coefficients are coming in as
// interpolated bytes, so there's bound to be a lot of slop
// from that. We've got a free slot in c35.z, so we'll use that.
// A better implementation would be to bias and scale our screen
// vert, effectively pushing the vert toward the camera without
// actually moving it, but this is easier and might work just
// as well.
add         r6.z, r6.z, c35.z;

//
// // Transform position to screen
//
//
//m4x3  r6, v0, c25; // HACKAGE
//mov       r6.w, c16.z; // HACKAGE
//m4x4     oPos, r6, c0; // ADDFOG
m4x4        r9, r6, c0;
add         r10.x, r9.w, c4.x;
mul         oFog, r10.x, c4.y;
mov         oPos, r9;


// Dyna Stuff
// Constants
// c33 = fC1U, fC2U, fC1V, fC2V
// c34 = fInitAtten, t, life, 1.f / (life-decay)
// c35 = ramp, 1.f / ramp, BIAS (positive is up), FREE
//
// Vertex Info
// v7.z = fBirth (because we don't use it for anything else).
//
// Initialize r1.zw to 0,1
mov     r1, c16.xxxz;
// Calc r1.x = age, r1.y = atten
// age = t - birth.
sub     r1.x, c34.y, v7.z;
// atten = clamp0_1(age / ramp) * clamp0_1((life-age) / (life-decay));
// first clamp0_1(age/ramp)
mul     r1.y, r1.x, c35.y;
min     r1.y, r1.y, c16.z; // Clamp to one (can't go negative).
// now clamp0_1((life-age) / (life-decay));
sub     r1.z, c34.z, r1.x;
mul     r1.z, r1.z, c34.w;
min     r1.z, r1.z, c16.z; // Clamp to one
max     r1.z, r1.z, c16.x; // Clamp to zero
mul     r1.y, r1.y, r1.z; // atten is the product of the two terms.

// color is (atten, atten, atten, 1.f)
// Need to calculate opacity we would have had from vs_WaveFixedFin7.inl
// Right now that's just modulating by r4.y.
mul     r0.y, r4.y, c34.x;
mul     oD0, r0.yyyy, r1.yyyw;
//mov oD0, c16.zzzz; // HACKTEST

// UVW = (inUVW - 0.5) * scale + 0.5
// where:
// scale = (fC1U / (age * fC2U + 1.f)), fC1V / (age * fC2U + 1.f), 1.f, 1.f
mov     r2, c16.xxxz;
mul     r2.xy, r1.xx, c33.yw;
add     r2.xy, r2.xy, c16.zz;
rcp     r2.x, r2.x;
rcp     r2.y, r2.y;
mul     r2.xy, r2.xy, c33.xz;
sub     r1.xy, v7.xy, c16.yy;
mul     r1.xy, r1.xy, r2.xy;
add     r1.xy, r1.xy, c16.yy;
mov     oT0, r1;