[Generic Physical - DrainValve01] Changed Mass to 1
[Generic Physical - DrainValve02] Changed Mass to 1
[Generic Physical - DrainValve03] Changed Mass to 1
[Generic Physical - DrainValve04] Changed Mass to 1
[Responder Modifier - cRespValve2Open] Removed Command that Disabled Physicals for DrainValve02
[Responder Modifier - cRespValve3Open] Removed Command that Disabled Physicals for DrainValve03
[Responder Modifier - cRespValve4Open] Removed Command that Disabled Physicals for DrainValve04
[Scene Node - Ercana_Canyon] Added Scene Object "Car-PIVOTFake"
[Scene Object - Cylinder01xx04] Added Coord interface "Cylinder01xx04"
[Scene Object - Cylinder01xx11] Added Coord interface "Cylinder01xx11"
[Scene Object - Cylinder01xx13] Added Coord interface "Cylinder01xx13"
[Scene Object - ercaStump06] Added Coord interface "ercaStump06"
[Scene Object - ercaStamp07] Added Coord interface "ercaStamp07"
[Scene Object - Loft39] Added Coord interface "Loft39"
[Scene Object - plant57] Added Coord interface "plant57"
[Scene Object - Car-PIVOTFake] Duplicate of Scene Object "Car-PIVOT", Coord Interface set to "Car-PIVOTFake" and All modifiers removed. Added to Modifiers - AG Modifier "cAnimHrvstrCarDockFake" and AG Master Mod "cAnimHrvstrCarDockFake"
[Coord Interface - BtnCallCarPOS] Adjusted to account for BtnCallCar being moved.
[Coord Interface - DashWarningLight01] Moved up because Harvester console was raised.
[Coord Interface - ercaDecalTrim] Raised Z coord by 0.1 to fix Z fighting it caused with other rocks.
[Coord Interface - Car-PIVOTFake] Duplicate of Coord Interface "Car-PIVOT". All Children removed.
[Coord Interface - Loft39] Created. Lowered plant so it touches the ground.
[Coord Interface - Cylinder01xx11] Created. Lowered plant so it touches the ground.
[Coord Interface - ercaStump06] Created. Lowered plant so it touches the ground.
[Coord Interface - ercaStamp07] Created. Lowered plant so it touches the ground.
[Coord Interface - Cylinder01xx13] Created. Lowered plant so it touches the ground.
[Coord Interface - Cylinder01xx04] Created. Lowered plant so it touches the ground.
[Coord Interface - plant57] Created. Lowered plant so it touches the ground.
[View Face Modifier - Swivel-HarvesterSpout] Face Object changed to Scene Object "Car-PIVOTFake"
[Drawable Span - Ercana_Canyon_00000000_0Spans] Changes made to vertice positions to move the cable next to the harvester ladder and to close a hole in the harvester console. Adjusted Harvester Console height higher to make using the Cart Call Button easier (It was floating before). Pipe01 moved up to account for raised console. Exported HarvesterBody3, HarvesterBody4, HarvesterBodyRear and Pipe01, then imported using Hoikas Gnarly Patcher.
[Drawable Span - Ercana_Canyon_40000000_2BlendSpans] Changes made to the vertice positions to move the save cloth near harvester start point
[Drawable span - Ercana_Canyon_40000008_2BlendSpans] Changes made to the vertice positions to move the save cloth glow near the harvester start point
[AG modifier - cAnimHrvstrCarDockFake] Duplicate of AG Modifier "cAnimHrvstrCarDock". Changed ChannelName to "Car-PIVOTFake"
[AG Master Mod - cAnimHrvstrCarDockFake] Duplicate of AG Master Mod "cAnimHrvstrCarDock". Changed private anim to ATC Anim "Car-PIVOT_CarGo_anim_2"
[Response Modifier - cRespHrvstrGoFwd] Duplicated entries for "cAnimHrvstrGo" and changed it to "cAnimHrvstrCarDockFake". Added "CarGoFake" to animname for new entries. Increased "WaitToCmdTable" cmd by 2 to account for two new commands.
[Response Modifier - cRespHrvstrGoRev] Duplicated entries for "cAnimHrvstrGo" and changed it to "cAnimHrvstrCarDockFake". Added "CarGoFake" to animname for new entries. Increased "WaitToCmdTable" cmd by 2 to account for two new commands.
[Response Modifier - cRespHrvstrStop] Duplicated entries for "cAnimHrvstrGo" and changed it to "cAnimHrvstrCarDockFake". Added "CarGoFake" to animname for new entries. Increased "WaitToCmdTable" cmd by 1 to account for new command.
[ATC Anim - BtnCallCar_Down_anim_1] Modified coords for new button position.
[ATC Anim - BtnCallCar_Up_anim_0] Modified coords for new button position.
[ATC Anim - PIVOT_CarGo_anim_2] Duplicate of ATC Anim "PIVOT_CarGo_anim_1". AGAnimParams name changed to "CarGoFake"
[Cluster Group - Cluster01_Grass_2] Lowered floating grass under the car ramp area
[Cluster Group - Cluster01_Pebble_3] Lowered floating rocks under the car ramp area
[Cluster Group - Cluster01_ScrubBrush_1] Lowered floating bush under the car ramp area
[Drawable Span - GUI_telescope_40000000_8BlendSpans] Doubled the outer area of the telescope mask by adding 8 new points in blender and created 4 faces with them. This mask is entirely black and is only noticed by ultra widescreen resolutions.
GUI_District_bkBahroRockBook.prp
[MipMap - xbahropagerock*0#0.hsm] Replaced Image with yeesha symbol that is correctly stretched to look correct in-game. Done by calumTraveler.
Co-authored-by: Traveler263 <87665301+Traveler263@users.noreply.github.com>
GUI_District_bkBahroRockBook.prp
[Dynamic Text Map - brpShareButton_dynText] Width and Height set to 512
GUI_District_BkBookImages.prp
[MipMap - xbahroyeeshashare*1#0.hsm] Enlarged MipMap "xbahroyeeshashare*1#0.hsm" from 256x256 to 512x512 with Gigapixel AI Upscaler - Art & CG filter.
[Scene Object - Elevator Wall] Coordinate Interface removed.
[Coordinate Interface - SubWorld_New] Scene Object "Elevator Wall" removed from Children
[Generic Physical - Elevator Wall] Bottom face removed. Angled and moved to bottom section of elevator shaft.
This round-trips the entire Cyan localization database through the
plLocalizationEditor built from H-uru/Plasma#958. This means that:
- the XML files are re-encoded from UTF-16 to UTF-8 and therefore should
load faster due to less run-time re-encoding
- journals should be written out as CDATA with the esHTML data visible
in the clear
This is a completely automated pass over nb01.prp with
CreateKickableSounds.py from Hoikas/moul-utils using the
nb01Marbles.json file. This is a good thing becuase the results are
completely reproducible and some rather misleading object naming is
cleaned up.
This reverts commit 2de6ebd7f0. The
intention is to run a script over the PRP to automate this process and
cleanup some of the strange object naming in the PRPs.
This collapses Sirius's additions pages into:
- Kadish_District_kdshVaultIntrYeesha
- Kadish_District_Textures
as appropriate. All Kadish files have been re-saved to ensure ObjIDs
remain consistent.
- [RopeLadder03_TOP01] Extended the collision of the upper ladder region
to ensure players cannot walk up to the edge and drop down,
potentially getting stuck inside of the ladder's proxy collision.
- [PlantProxy27] Adjusted collision such that the avatar can walk or
jump between it and PlantProxy26 without getting stuck between two
parallel vertical planes.
- [ResponderModifier] cRespHrvstrStop - remove forced halt to the
harvester car. The python script controls when the car stops.
Unconditionally forcing it to stop will prevent script controlled
actions from completing, causing state desynch.
- [ResponderModifier] cRespCallCar - Removed the forced ramp lowering,
which could result in the ramps lowering while the car and harvester
are decoupled. This would allow players to walk off the ramps and fall
out of the Age.
These already existed in the PRP files but were not hooked up correctly.
This adds all missing connections and fixes the way some objects were
parented.
- [PhysicalSndGroup] cSfxPhysSnd-Marble0[1-4]_0 added references to
random sound mods for the physical sfx.
- [CoordinateInterface] SfxMarble-(Hit|Roll)Emit0[1-4] changed parent
object to MarblePhy0[1-4] as appropriate and set the parent transform
offset to 0,0,0. Previously, this was parented to a root object that
did not move.
The other three marbles in the clock area will require the creation of
new objects and will be done in another commit.
[PXPhysical] Bendy Bridge
Changed the member group from kGroupDynamic to kGroupStatic. The
previous setting is for kickables (which this bridge is not). PhysX does
not allow for non-kinematic dynamic bodies to have triangle mesh bounds.
Because of the improper member group, we were forcing PhysX to treat the
triangle mesh bounds as a convex hull, making the whole bridge solid.
Or, as Simulation.0.log says:
```
WARNING: 'BendyBridge' is a dynamic triangle mesh; this is not supported
in PhysX 4... forcing to convex hull, sorry.
```
[Generic Physical - CamRegElevShaft02] Subworld set to <plKey NULL="True" />
[Generic Physical - ElevatorCameraBlocker] Subworld set to <plKey NULL="True" />
[Generic Physical - EntryStaticCamRegion] Subworld set to <plKey NULL="True" />
[Generic Physical - proxyTerrainMeshForElevatorCam] Subworld set to <plKey NULL="True" />
[Generic Physical - proxyTerrainMeshForElevatorCam01] Subworld set to <plKey NULL="True" />
Wrong shirt was assigned in python file mod for first week shirt. This fixes that issue.
[Python File Mod - cPythFirstWeekShirtTakable - 4] Changed to "FReward_Launch"
[Python File Mod - cPythFirstWeekShirtTakable - 5] Changed to "MReward_Launch"
This is just a re-convert with a patch to CreateClothingPRP.py that
ensures icons only have one level. If there are multiple levels,
changing the texture quality will cause certain assumptions in the ACA
python to be invalidated, resulting in junked UI.
I seem to have forgotten that SDL `STRING32` variables have a fixed
length of 32 bytes. Sigh. So we must limit our names to this. Therefore,
I have renamed the shirts to "LSMysterium2021" and "SSMysterium2021".
The SDL string "LSMysterium2021;SSMysterium2021" will use up the
entirety of the 32 byte string buffer.
These PRPs are generated from the JSON source by the script
CreateClothingPRP.py, originally by @Deledrius. The specific fork used
to generate these files can be found at
https://github.com/Hoikas/moul-utils.
PRP provided by Siruis - http://forums.openuru.org/viewtopic.php?p=10053#p10053
Opened in PRPShop and saved as Moula PRP
No other changes made
Tested in game and seems like it worked.
Someone with CC Kadish Vault will need to do a comparison, as I dont have access to it at the moment
Co-authored-by: Jrius <2261279+Jrius@users.noreply.github.com>
This is accomplished by changing the RenderLevel on the DSpans from
0x40000000 (BlendRendMajorLevel) to 0x80000001 (LateRendMajorLevel + 1).
Partly addresses GitHub issue #18.
- [Layer #2267] Changed the texture to the new cube map.
- [nb01clockrefl*0.hsm] Newly rendered cube map for the clock lens.
- [nb01clocknumbers*40#0.hsm] Updated to use the 2048x128 source image
from the MOUL textures dump instead of the resized 1024x128 version
from Plasma MAX. This increases the clarity of the numbers in the
lens.
- [nbClockGlobe_(Entire Animation)_anim_0] Rotated all keyframes such
that the animation starts and stops at 0/25 instead of the first half
pahrtahvotee. Propogated this half p adjustment to all other
keyframes.
- [Map #2266_anim_nb01TimeOfDay] Fixed layer offset keyframes such that
the animation starts and stops at 0/25 instead of the first half
pahrtahvotee.
EhrenCG
